Site icon TakeGaki Setups

DiRT Rally 2.0 Lancer Evo VI Car setup Australia 1

[ Data ]

Track: Australia Bondi Forest

Weather: Dry

[ Alignment ]

(Front)Toe Angle: -0.00

(Front)Camber Angle: -1.93

(Rear)Toe Angle: 0.00

(Rear)Camber Angle: -2.00

[ Brakes ]

Braking Force: 2,850.00

Brake Bias: 66

[ Differential ]

(Front)Viscous Differential: –

(Front)LSD Driving Lock: 36

(Front)LSD Braking Lock: 36

(Front)LSD Preload: 100

(Centre)Viscous Differential: 24/100

(Centre)LSD Driving Lock: –

(Centre)LSD Braking Lock: –

(Centre)LSD Preload: –

(Centre)Torque Bias: –

(Rear)Viscous Differential: –

(Rear)LSD Driving Lock: 36

(Rear)LSD Braking Lock: 36

(Rear)LSD Preload: 100

[ Gearing ]

1st Gear: 0.291

2nd Gear: 0.407

3rd Gear: 0.513

4th Gear: 0.656

5th Gear: 0.808

6th Gear: 1.000

Final Drive: 0.251

[ Damping ]

(Front)Slow Bump: 4

(Front)Fast Bump: 5

(Front)Bump Zone Division: 0.72

(Front)Slow Rebound: 5

(Rear)Slow Bump: 4

(Rear)Fast Bump: 5

(Rear)Bump Zone Division: 0.72

(Rear)Slow Rebound: 4

[ Springs ]

(Front)Ride Height: 30.00

(Front)Spring Rate: 98.42

(Front)Anti-Roll Bar: 13.00

(Rear)Ride Height: 30.00

(Rear)Spring Rate: 78.57

(Rear)Anti-Roll Bar: 14.00

– Impression

This track is dangerous. Because it has jumps and undulations at high speed. I focused on stability. I made LSD stronger. This increases stability and traction. I strengthened Fast Bump to handle big jumps. I’m comparing with the rain setting. Please refer to it if you like.
Please adjust to your preference. 🙏

Mitsubishi Lancer Evo VI Australia WET and DRY / Logitech G29 DiRT Rally 2.0
Wet Car setting
Related articles
Exit mobile version